Numi 3 24 Volt

Return to site

Numi 3 24 Volt

Numi 3 24 Volt Battery
Numi 3 24 Volt Battery Charger
Numi 3 24 Volt Power Adapter
Product InformationStore Part Number: PM3-50-24Kit includes: 3/8-in impact wrench, 1/2-in impact wrench, reciprocating saw, 4.0-Ah battery, and rapid charger. 3/8-In impact wrench features: a motor that delivers 150-ft-lbs of torque, a variable-speed trigger that generates 0-2,300 RPM and 0-3,500 RPM's, and an LED work light.
Hi guys, I've got some LJ12A3-4-Z/BX inductive proximity sensors that I want to hook up to an input on my board that only accepts 3.3V. The sensor is powered with 24V, and the output pin is 24V when no object is detected. When a metallic item comes within 4mm the output falls from 24V to 0V.
#57 Miniature Bulb Ba9S Base - 14.0 Volt.24 Amp 3.36 Watt G4-1/2 Ba9S Base, 500 Hour #74 Miniature Bulb Glass Wedge Base - 14.0 Volt 0.10 Amp 1.4 Watt T-1-3/4 Glass Wedge Base, 500 Hour #555R Red Miniature Bulb Glass Wedge Base #2825 (W5W) Miniature Bulb Glass Wedge Base.
OverviewUsing only the best in manufacturing technology, Power Max has designed and built a powerhouse charger/converter. Capable of provinding a constant load demand of up to 100% of its rated capacity, the PM3 series converters are among the best. Pumps, fans, motors, and radio equipment will run with no problems on the PM3 converter/charger. 
Each PM3 charger/converter has a fully integrated 3 stage microprocessor controller charger along with its highly controlled power supply output. The PM3 can accept a low voltage input of 105 volts, and up to 135 VAC on the high end. Weighing in at only 11 pounds, the PM3-50-24 is a great option for radio, backup power, and pump use, as well as many other low amperage demands. Due to the fact of its high demand abilities, the PM3 must be installed in a well-ventilated area where it will be safe from the environment. 
Voltage 24 VDC CCA 300 amps Capacity (C/1) 16 Ah Dimensions / weight 7.3'L, 7.5'W, 6.1'H / 30 lbs. Gill is a trade name of: NOTE: It has come to our attention that the terminals on the old battery (6145) are larger than what is specified on its drawing. This can cause your battery clamps to stretch out & become loose.
FeaturesOptimal 3 Step Charging 
Demand Sensing 
Reverse Polarity Protection 
Over Voltage Protected 
Short Circuit Protection 
Overload Protection 
Line Regulation 
Load Regulation 
Thermal Protection 
UL and CUL Approved 
2 Years Warranty
Comments* Flat Rate shipping is for the lower 48 states only.
Tech SpecsDimensions (LxWxH): 7.15 x 11.5 x 3.45 in
Weight: 11 lbs 
Shipping Weight: 13 lb
DC Output Voltage (No Load): 27.2V (DC) 
Output Voltage Tolerance (No Load) Approx.: ±.7% 
Output Amperage, Max Continuous: 50 Amps 
Output Voltage (Full Load) Approx.: >27.2V (DC) 
Maximum Power Output, Continuous: 1460 Watts 
Three Stage: 26.4V / 27.2V / 29.2V (DC) 
Input Voltage Range:  105-135 AC 
Input Voltage Frequency:  47-63Hz 
Maximum AC Current @ 108VAC: 14 Amps 
Model: PM3-50-24
Manufacturer: Power Max
Typical Efficiency: >85% 
Max Inrush Current, Single Cycle: 40 Amps 
Short Circuit Protection: YES 
Overload Protection: >100% 
Line Regulation: 50 mV rms 
Load Regulation: <1.0% 
Fan Control: Proportional 
Thermal Protection: YES 
Working Temperature Range: 0°-45°C 
Storage Temperature: -20° to 80°C 
Withstand Voltage: 1240V @ Leads 
Regulatory Approval: UL and CUL Approved
Manufacturer Part #: PM3-50-24
Made In: China
Numi 3 24 Volt BatteryReviews and RatingsNumi 3 24 Volt Battery Charger

Numi 3 24 Volt Power AdapterDo you own the PM3-50-24? Please, tell us what you think about it. It helps us provide you with better products. Please note that it may take up to 72 hours for your review to appear.
Manuals & TutorialsSearch This Site
Browse by Vehicle Make and Model
Browse All PartsAll Parts
Accessories
Axles
Batteries
Battery Chargers
Battery Harnesses
Bearings
Belts
Brakes
Brake Cables
Brakes Levers
Bulbs
Chain
Chargers
Charger Ports
Connectors
Controllers
Circuit Breakers
Drive Belts
Forks
Freewheels
Fuses
Fuse Holders
Grips
Handlebars
Hardware
Headlights
Horns
Inner Tubes
Key Switches
Kickstands
Kits
Lighting
Meters
Mirrors
Motors
Relays
Rims
Shock Absorbers
Seats
Seat Posts
Speed Controllers
Sprockets
Switches
Taillights
Throttles
Tires
Tools
Tubes
Turn Signals
Voltage Converters
Wheels
Wire
Wire Connectors
Speed Controllers >
12 Volt Controllers18 Volt Controllers24 Volt Controllers36 Volt Controllers48 Volt Controllers60 Volt Controllers72 Volt Controllers
24 Volt Brushed 
Motor Controllers24 Volt Brushless 
Motor Controllers
24 Volts Speed Controllers for Brushed Motors
24 Volt
120 Watt
24V 120W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 120 Watts. Maximum current 10 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-24120
Wiring Directions$16.95
24 Volt
150 Watt
24V 150W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 150 Watts. Maximum current 15 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-24150
Wiring Directions$19.95
24 Volt
250 Watt
24V 250W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 250 Watts. Maximum current 20 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-24250
Wiring Directions$29.95
24 Volt
250 Watt
E-Scooter and E-Bike 24 Volt 250 Watt Speed Controller
Designed for 24 Volt motors up to 250 Watts. Maximum current 20 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-24250A
Wiring Directions$29.95
24 Volt
250 Watt
24V 250W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 250 Watts. Maximum current 20 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-24250B
Wiring Directions$29.95
24 Volt
350 Watt
24V 350W Electric Scooter or Bike Speed Controller
Designed for 24 Volt motors up to 350 Watts. Maximum current 25 Amps. Under Voltage protection 20 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-24350B
Wiring Directions$34.95
24 Volt
350 Watt
CT-201C6 24V 350W Electric Scooter or Electric Dirt Bike Speed Controller
Designed for 24 Volt motors up to 500 Watts. Most commonly used on older model Razor scooters and bikes with 250 and 350 Watt motors. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-CT201C6
Wiring Directions$29.95
24 Volt
350 Watt
CT-302S9 24V 350W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 350 Watts. Maximum current 25 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Model CT302S-9
Item # SPD-CT302S9
Wiring Directions$34.95
24 Volt
350 Watt
 Casino in spanish.
CT-811B9 24V 350W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 350 Watts. Maximum current 25 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Model CT811B-9
Item # SPD-CT811B9
Wiring Directions$34.95
24 Volt
400 Watt
Currie 24V 400W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 400 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Fits eZip, IZIP, Schwinn, GT, and Mongoose electric scooters up to 400 Watts that have 5 connectors and a 5 wire throttle. Model XK-022A
Item # SPD-SD400
Wiring Directions$59.95
24 Volt
450 Watt
Currie 24V 450W Electric Bicycle Speed Controller
Designed for 24 Volt motors up to 450 Watts. Maximum current 35 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Fits Currie Electro Drive 450 Watt electric bicycle conversion kit plus eZip and IZIP electric bicycles that have controllers with the same or less connectors. Some controllers that this one replaces have wires coming out of the long side instead of the short side of the case like this controller does.
Replaces model numbers: 24V 35A / 24V 1-4V 35A / CT-2435-003 / DM-CB24-PAS / DM-140LA.
Item # SPD-SD450
Wiring Directions
$59.95
24 Volt
500 Watt
24V 500W Speed Controller
Designed for 24 Volt motors up to 500 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Mounting tabs on back side of controller. Fits many common electric scooter and bicycle models. 
Item # SPD-24500
Wiring Directions$39.95
24 Volt
500 Watt
 Sublime merge build 1111 download free.
24V 500W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 500 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Fits many electric scooter and bicycle models. Model: 2404 / YK31C
Item # SPD-24500B
Wiring Directions$39.95
24 Volt
500 Watt
Reversible
24V 500W Speed Controller with Reverse
Reversible speed controller operates in either forward or reverse mode. Designed for 24 Volt motors up to 500 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends the life of the battery pack. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-24500R
Wiring Directions$59.95
24 Volt
500-600 Watt
Currie 24V 500W-600W Electric Scooter Speed Controller with 3-Wire Throttle Connector
Designed for 24 Volt motors up to 600 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Fits Currie, eZip, IZIP, Schwinn, GT, and Mongoose electric scooters that have a 3-wire throttle.
Item # SPD-SD300
Wiring Directions$64.95
24 Volt
500-600 Watt

Currie 24V 500W-600W Electric Scooter Speed Controller with 5-Wire Throttle Connector
Designed for 24 Volt motors up to 600 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Fits eZip, IZIP, Schwinn, GT, and Mongoose electric scooters that have a 5-wire throttle.
Item # SPD-SD500
Wiring Directions$56.95
Translator 1 2 0. 24 Volt
500-600 Watt
Currie 24V 500W-600W Electric Scooter Speed Controller with 6-Wire Throttle Connector
Designed for 24 Volt motors up to 600 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Fits eZip, IZIP, Schwinn, GT, and Mongoose electric scooters that have a 6-wire throttle.
Item # SPD-SD500-6
Wiring Directions$59.95
24 Volt
750-900 Watt

Currie 24V 750W-900W Electric Scooter Speed Controller with 5-Wire Throttle Connector
Designed for 24 Volt motors up to 900 Watts. Maximum current 40 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Fits eZip, IZIP, Schwinn, GT, and Mongoose electric scooters that have a 5-wire throttle.
Item # SPD-SD750-5
Wiring Directions$59.95
24-36 Volt
900 Watt
24-36V 900W Electric Scooter/Bicycle Speed Controller with Throttle
Robust heavy-duty design with large heat sinks and thick 10 gauge wires. Epoxy encapsulated electronics for a high level of water resistance. 24-36 Volt input range. Designed for 24 Volt motors up to 600 Watts and and 36 Volt motors up to 900 Watts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Includes a standard variable speed hall-effect twist throttle with matching left hand side grip. Works with both 24 and 36 Volt battery packs.
Item # SPD-36900A
Wiring Directions$79.95
Replacement Throttle for SP36900A
Plug-and-play replacement twist throttle for item # SPD-36900A speed controller sold above. Includes matching left hand grip.
Item # THR-36900A$23.95
24 Volt
1000 Watt
24V 1000W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 1000 Watts. Maximum current 45 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-241000
Wiring Directions$46.95
24-36 Volt
1000+ Watt
24-36V 1000W Heavy-Duty Electric Scooter Speed Controller
24-36 Volt input range. Suitable for 24 Volt motors up to 1200 Watts and 36 Volt motors up to 1800 Watts. Maximum current 50 Amps. Heavy-duty design with large cooling fins for demanding applications. Current limiting feature helps prevent controller damage due to over-current conditions. Compatible with standard 3-wire variable speed hall-effect throttles. Works with both 24 Volt and 36 Volt battery packs.
Item # SPD-241000D
Wiring Directions$74.95
Speed Controller for eZip® and IZIP® Electric Bicycles
Speed controller for eZip® Coastline and Trailz plus IZIP® Mountain Trails, Trailz, Skyline, and Urban Cruiser electric bicycles. Model 24V 35A, CTE-2435-002, and CB24-YR8. This controller is for bikes that have two brake switch connectors (one connector for each brake lever switch cable). Can also be used with bikes that have one brake switch connector by not using the second connector on the controller. If you do not know which controller to get choose this one because it will work with all versions.
Item # CTE-24436$59.95
Speed Controller for eZip® and IZIP® Electric Bicycles
Speed controller for eZip® Coastline and Trailz plus IZIP® Mountain Trails, Trailz, Skyline, and Urban Cruiser electric bicycles. Model: 24V 35A, and CTE-2435-001. This controller is for bikes that have one brake switch connector (both brake lever switch cables go to one connector). For bikes that have two brake switch connectors choose item # CTE-24436 sold above.
Item # CTE-24438$59.95
Speed Controller for Currie® Electric Bicycles
Speed controller for Currie® electric bicycle kit. For PAS systems only. Rated: 24V 15A
Item # CTE-24371$54.95
24 Volts Speed Controllers for Brushless Motors
Brushless motors have three power wires and between zero to five sensor wires.
24 Volt
250 Watt
Brushless
 Graphicriver 49 vintage photoshop actions 19433829 download free.
24 Volt 150-250 Watt Electric Scooter/Moped/Bike Brushless DC Motor Speed Controller(CW or CCW)
Designed for 24V brushless DC motors between 150W and 250W. Replaces controllers with fewer connectors because most of the connectors are optional to use. Under Voltage protection 19 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Compatible with standard 3-wire variable speed hall-effect throttles.
Dimensions: 3-1/2' L x 2-1/2' W x 1-1/4' T
Item # SPD-24250BLDC
$29.95
24 Volt
500 Watt
Brushless
24 Volt 350-500 Watt Electric Scooter/Moped/Bike Brushless Motor Speed Controller(CW or CCW with Optional Reverse)
Designed for 24V brushless DC motors between 350 and 500 Watts. Replaces controllers with fewer connectors because most of the connectors are optional to use. Under Voltage protection 21.5 Volts. Current limiting feature helps prevent motor and controller damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Compatible with standard 3-wire variable speed hall-effect throttles.
Dimensions: 6' L x 3-1/2' W x 1-3/4' T
Item # SPD-24500BLDC
$59.95
2 Pin Battery/Motor Connector Set with Pins
2 Pin battery/motor connector set for Chinese-made electric scooters and bikes. Includes matching terminal pin set.
Item # CNX-50$1.49
2 Pin Throttle/Speed Controller Connector Set with Pins
2 Pin throttle/speed controller connector set for Chinese-made electric scooters and bikes. Includes matching terminal pin set.
Item # CNX-51$1.49
3 Pin Battery/Motor Connector Set with Pins
3 Pin battery/motor connector set for Chinese-made electric scooters and bikes. Includes matching pin set.
Item # CNX-150$1.49
3 Pin Throttle/Speed Controller Connector Set with Pins
3 Pin throttle/speed controller connector set for Chinese-made electric scooters and bikes. Includes matching terminal terminal pin set.
Item # CNX-52$1.49
4 Pin Throttle/Speed Controller Connector Set with Pins
4 Pin throttle/speed controller connector set for Chinese-made electric scooters and bikes. Includes matching terminal pin set.
Item # CNX-53$1.49
6 Pin Throttle/Speed Controller Connector Set with Pins
6 Pin throttle/speed controller connector set for Chinese-made electric scooters and bikes. Includes matching terminal pin set.
Item # CNX-54$1.49
Heavy-Duty 13' Dual 2-Prong Connector
Two mating 2-Prong connectors attached to 11 inches of 10 gauge wire.
Item # CNX-2PX2$4.95